DIY a Sleek and Modern Cat Scratcher
Having cats doesn't mean that your house has to turn into a disaster area of toys, treats, and centre-sore cat trees and scratchers. I have two energetic indoor cats who dearest to scratch, so they demand to a designated expanse to play and sharpen their claws. But unfortunately most shop-bought cat trees and scratchers are either unattractive or very expensive. Luckily making your own true cat scratcher is super piece of cake and tin can be washed using ii pieces of wood and rope.
I love this scratcher considering in addition to beingness really easy to brand, information technology's very sleek looking! You can customize it by painting it whatsoever color you'd similar, and information technology's pocket-size enough to be tucked abroad if demand exist. If you'd like to acquire how to make a sleek and modern cat scratcher for your home, read on!
Supplies:
- Two pieces of wood
- Miter saw, protective glasses
- Jute or sisal rope
- Hand-held staple gun
- Gum
- Sandpaper
- Pigment
- Nail gun
Instructions:
i. Decide how high, long, and wide you lot'd like your cat scratcher to be. So, cut two pieces of woods using those measurements. One slice of wood will be the long slanted slice, while the other will be the piece that props the long piece up.
2. Prop the pieces upwards confronting i some other and decide how much of an angle you'd like to create. Then, use your miter saw to cut the two pieces appropriately. Once the pieces are cut and fit nicely together, use your sandpaper to smoothen out any jagged spots.
iii. Paint both pieces. I went with a deep majestic.
four. When they are dry out, take hold of your rope, manus-held staple gun, and gum. To beginning creating the scratching area, staple the end of the rope to the back of the longer piece wherever you'd similar the scratching portion to beginning. Then wind it tightly around a few times, securing with staples.
(Note: Make sure to always staple on the back of the piece; you lot don't want your kitty'due south claws getting stuck in staples on the pinnacle!)
Add some glue down the front of the scratcher for extra security. As you lot go along winding, staple every few rows (on the back of the scratcher) to secure the rope in place. When you're finished winding, secure the end of the rope in place with multiple staples.
While yous're winding, you might run in to some looser spots or gaps. Only scrunch those up by pushing the sides up. This will close the gaps for a nice, clean look.
5. Secure the 2 pieces together using glue and a boom gun. If you have something to use to clamp the ii pieces together, yous can use a very potent gum and no nails. I did not have anything to clench the pieces together with, so I just did a line of mucilage and nailed the pieces in place.
Afterward yous've shot the nails in, y'all tin can fill the holes with putty and pigment over them for a smooth stop, or you tin can merely paint over them to camouflage them.
And that's it–a elementary little sleek, modern cat scratcher that will brand your kitty happy and look good in your room!
Source: https://www.homedit.com/cat-scratcher/
Belum ada Komentar untuk "DIY a Sleek and Modern Cat Scratcher"
Posting Komentar